PRODUCTS CENTER

About PPGI


The term is an extension of GI which is a traditional abbreviation for Galvanized Iron. Today the term GI typically refers to essentially pure zinc (>99%) continuously hot dip coated steel, as opposed to batch dip processes. PPGI refers to factory pre-painted zinc coated steel, where the steel is painted before forming, as opposed to post painting which occurs after forming.

The hot dip metallic coating process is also used to manufacture steel sheet and coil with coatings of aluminium, or alloy coatings of zinc/aluminium, zinc/iron and zinc/aluminium/magnesium which may also be factory pre-painted. While GI may sometimes be used as a collective term for various hot dip metallic coated steels, it more precisely refers only to zinc coated steel. 

Similarly, PPGI may sometimes be used as a general term for a range of metallic coated steels that have been pre-painted, but more often refers more precisely to pre-painted zinc coated steel.

Zinc coated steel substrate for PPGI is typically produced on a continuous galvanizing line (CGL). The CGL may include a painting section after the hot dip galvanising section, or more commonly the metallic coated substrate in coil form is processed on a separate continuous paint line (CPL). Metallic coated steel is cleaned, pre-treated, applied with various layers of organic coatings which can be paints, vinyl dispersions, or laminates. The continuous process used to apply these coatings is often referred to as Coil Coating.


PPGI01.jpg



Ppgi application


The main uses of pre-painted Ppgi are home appliances and construction.

Home appliance uses are mainly side door panels for refrigerators, and shells for air conditioners, freezers, and washing machines. The construction field is more widely used than home appliances.

PPGI for construction is used for roofing, guttering, sandwich panels, industrial building facades, cold storage panels, and rolling doors.


Standard Color


Our ppgi has a variety of colors for you to choose from. You can see part of RAL color cards here for reference of the colors you need. You can also visit our ppgi factory, where you can see the colors of these ppgi more directly. 

If you need to know more colors, please contact our sales staff, we will provide you with the most detailed parameters and the products you need, I hope our quality service can let you get the most comfortable shopping experience.



PPGI02.jpg




Coating Thickness Selection


The top coating is larger than 20μm to prevent the intrusion of corrosive media. Due to the different anti-corrosion mechanisms of primer and finish coating, not only the total coating thickness should be guaranteed, but also the thickness of primer (>5μm) and finish coating (>15μm).

PVDF pre-painted steel coil requires a thicker coating. It provides a longer service life. The requirements for the backside paint coating depend on the application, and the sandwich panel only requires a layer of primer. The formed steel plate requires two coats. The thickness is at least greater than 10 μm.